Fuel-It! Bluetooth FLEX FUEL KITS for E CHASSIS BMW

$485.95 USD

$485.95 USD

Auction Sold out

Know your exact ethanol content in existent-fourth dimension via the Fuel-It! or JB4 mobile app on your smartphone or tablet.

If you are running E85 or ethanol mixes in your BMW, you need this kit!

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Chassis BMW.

This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 uniform fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content.

Includes both Bluetooth App & 5v analog output for JB4 or flash tuning

    • Bluetooth(iPhone or Android app must be downloaded to use this feature)
    • If you are using an Apple product the app can be institute by clicking hither
    • If yous are using an Android production the app can exist found by clicking here

For your fuel line upgrade, choose the option that supports your electric current configuration.

  • HPFP to the fuel tank: (Stock)
    • This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor.
  • Port Injection to the fuel tank:
    • If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and so utilizes a Y adapter to supply the HPFP and PI with fuel.  Our custom fittings remove those tee'southward and extra fittings for a cleaner high menstruum setup.
  • Phoenix Racing Manifold to the fuel tank:
    • If you are running the Phoenix Racing Manifold port injection kit, this upgrade also replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel.  Our custom fittings remove those tee'due south and extra fittings for a cleaner loftier flow setup.
    • Not-Fuel-Information technology! port injection to fuel tank:
      • Choose this option if you are running a port injection kit that we did not manufacture or sell.  This kit includes a longer 18" feedline from the Y to the port injection rail.  You then cut the feed line to the length you demand and install the included -6an female plumbing fixtures or -6an female elbow to make the connectedness to your port injection runway.

    All of our kits utilize our custom billet aluminum fittings to integrate with the stock fittings and then no modifications are needed.

    *For the BMW N54 E-series JB4 platform connect the white wire to position #xv on the JB4 25 pin harness. Select WMI page option 15/16 input to enable.

    *For the BMW N55 E-serial JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI page option 15/16 input to enable.

    *These kits are bachelor for off-route utilise merely

    *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absenteeism of gasoline, so if your fuel is contaminated your ethanol readings may exist artificially elevated.